PLANET FGSW-2840 User Manual
Page 147
User’s Manual of FGSW-2840 / FGSW-4840S
is not a router port any more.
Member Port Time
Specify the aging time of the member port. Within this time, if the Managed Switch
doesn’t receive IGMP report message from the member port, it will consider this
port is not a member port any more.
Specify the interval between the Managed Switch receiving a leave message from a
host, and the Managed Switch removing the host from the multicast groups.
Leave Time
Select the static router port which is mainly used in the network with stable
topology.
Router Ports
The router port should be in the multicast VLAN, otherwise the member ports cannot receive
multicast streams.
The Multicast VLAN won't take effect unless you first complete the configuration for the
corresponding VLAN owning the port on the 802.1Q VLAN page.
It is recommended to choose GENERAL as the link type of the member ports in the multicast
VLAN.
After a multicast VLAN is created, all the IGMP packets will be processed only within the
multicast VLAN.
Buttons
: Click to create a new VLAN configuration for IGMP Snooping.
: Click to apply changes.
: Click to delete VLAN configuration from VLAN table.
: Click to display help web page.
147