PLANET FGSW-2840 - Manual (Page 64)

User’s Manual of FGSW-2840 / FGSW-4840S
Managed Switch should be in the same Speed and Duplex mode with the Managed
Switch. When “Auto” is selected, the Speed and Duplex mode will be determined
by auto-negotiation. For the SFP port, this Managed Switch does not support
auto-negotiation.
Allows you to enable/disable the Flow Control feature. When Flow Control is
enabled, the Managed Switch can synchronize the speed with its peer to avoid the
packet loss caused by congestion.
 Flow Control
Displays the LAG number which the port belongs to.  LAG
Buttons
: Click to apply changes.
: Click to display help web page.
 The port description can accept 16 characters only.
 The Managed Switch cannot be managed through the disabled port. Please enable the port
which is used to manage the Managed Switch.
 The parameters of the port members in a LAG should be set as the same.
 When using the SFP port with a 100M module or a gigabit module, it needs to configure its
corresponding Speed and Duplex mode.
 For 100M module, please select 100MFD while selecting 1000MFD for gigabit module. By
default, the Speed and Duplex mode of SFP port is 1000MFD. (For FGSW-2840 only)
64