3 vlan config – PLANET FGSW-2840 User Manual
Page 144
User’s Manual of FGSW-2840 / FGSW-4840S
Buttons
: Click to apply changes.
: Click to display help web page.
4.6.1.3 VLAN Config
The multicast groups established by IGMP Snooping are based on VLANs, this page provides to configure different IGMP
parameters for different VLANs; the screen in
Figure 4-6-8
appears.
Figure 4-6-8
: VLAN Config Page Screenshot
The page includes the following fields:
Object
Description
VLAN Config
Enter the VLAN ID to enable IGMP Snooping for the desired VLAN.
VLAN ID
Specify the aging time of the router port. Within this time, if the Managed Switch
doesn’t receive IGMP query message from the router port, it will consider this port
is not a router port any more.
Router Port Time
Member Port Time
Specify the aging time of the member port. Within this time, if the Managed Switch
doesn’t receive IGMP report message from the member port, it will consider this
port is not a member port any more.
Leave Time
Specify the interval between the Managed Switch receiving a leave message from
a host and the Managed Switch removing the host from the multicast groups.
144