PLANET FGSW-2840 - Manual (Page 224)

User’s Manual of FGSW-2840 / FGSW-4840S
4.10.2.2 Local Log
The Local Log is the log information saved in Managed Switch. By default, all system logs are saved in log buffer and the logs
with severities from level_0 to level_4 are saved in log file meanwhile; the screen in Figure 4-10-7 appears.
Figure 4-10-7: Local Log Page Screenshot
The page includes the following fields:
Object Description
Local Log Config
 Select
Select the desired entry to configure the corresponding local log.
 Channel / Log Buffer Indicates the RAM for saving system log. The inforamtion in the log buffer is
displayed on the Log Table page. It will be lost when the Managed Switch is
restarted.
Indicates the flash sector for saving system log. The inforamtion in the log file will
not be lost after the Managed Switch is restarted and can be exported on the
Backup Log page.
 Channel / Log File
Specify the severity level of the log information output to each channel. Only the
log with the same or smaller severity level value will be output.
 Severity
Enable/Disable the channel.  Status
Buttons
: Click to apply changes.
: Click to display help web page.
224