PLANET FGSW-2840 - Manual (Page 104)

User’s Manual of FGSW-2840 / FGSW-4840S
VLAN setting example:
- Separate VLANs
- 802.1Q VLAN Trunk
Two separate 802.1Q VLANs
The diagram shows how the Managed Switch handles Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLANs. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in Figure 4-4-3 appears and Table 4-4-1 describes the port configuration of the Managed
Switches.
Figure 4-4-3: Two Separate VLAN Diagrams
VLAN Group VID Untagged Members Tagged Members
VLAN Group 1 1 Port-7~Port-8 N/A
VLAN Group 2 2 Port-1,Port-2 Port-3
VLAN Group 3 3 Port-4,Port-5 Port-6
Table 4-4-1: VLAN and Port Configuration
104