beautypg.com

3 logout command, 4 loopback command, 5 ping command – PLANET FGSW-2840 User Manual

Page 240: 6 tracert command, 7 exit command

background image

User’s Manual of FGSW-2840 / FGSW-4840S

6.1.3 logout command

Description:

Logout the system

Syntax:

logout

6.1.4 loopback Command

Description:

The loopback interface command is used to test whether the port is available or not

Syntax:

loopback interface { fastEthernet port | gigabitEthernet port } { internal | external }

6.1.5 ping command

Description:

The ping command is used to test the connectivity between the Managed Switch and one node of the network

Syntax:

ping A.B.C.D - Destination IP address

6.1.6 tracert command

Description:

The tracert command is used to test the connectivity of the gateways during its journey from the source to destination of the

test data

Syntax:

tracert {ip-addr} [maxHops]

6.1.7 exit command

Description:

The exit command is used to return to the previous Mode from the current Mode

Syntax:

exit

240

This manual is related to the following products: