PLANET FGSW-2840 - Manual (Page 40)

User’s Manual of FGSW-2840 / FGSW-4840S
40
The page includes the following fields:
Object Description
 MAC Address Displays MAC Address of the Managed Switch.
 IP Address Mode
Select the mode to obtain IP Address for the Managed Switch.
 Static IP : When this option is selected, you should enter IP Address, Subnet Mask and
Default Gateway manually.
 DHCP : When this option is selected, the Managed Switch will obtain network
parameters from the DHCP Server.
 BOOTP : When this option is selected, the Managed Switch will obtain network
parameters from the BOOTP Server.
 Management VLAN Enter the ID of management VLAN, the only VLAN through which you can get access to
the Managed Switch. By default VLAN1 owning all the ports is the Management VLAN and
you can access the Managed Switch via any port on the Managed Switch. However, if
another VLAN is created and set to be the Management VLAN, you may have to reconnect
the management station to a port that is a member of the Management VLAN.
 IP Address Enter the system IP of the Managed Switch.
The default system IP is 192.168.0.100.
 Subnet Mask Enter the subnet mask of the Managed Switch.
The default subnet mask is 255.255.255.0.
 Gateway Enter the default gateway of the Managed Switch.
The default gateway is 192.168.0.254.
 Changing the IP address to a different IP segment will interrupt the network communication;
please keep the new IP address
in the same IP segment with the local network.
 The Managed Switch only possesses an IP address; the IP address configured will replace the
original IP address.
 If the Managed Switch gets the IP address from DHCP server, you can see the configuration of
the Managed Switch in the DHCP server; if DHCP option is selected but no DHCP server exists
in the network, a few minutes later, the Managed Switch will restore the setting to the default.
 If DHCP or BOOTP option is selected, the Managed Switch will get network parameters
dynamically from the Internet, which means that its IP address, subnet mask and default
gateway cannot be configured.
Buttons
: Click to apply changes.
: Click to display help web page.