PLANET FGSW-2840 - Manual (Page 252)

User’s Manual of FGSW-2840 / FGSW-4840S
6.3.18 system-time Command
Description:
System-time configuration
Syntax:
system-time dst date {smonth} {sday} {stime} {emonth} {eday} {etime} [offset]
no system-time dst
system-time dst predefined {USA | Australia | Europe| New-Zealand}
no system-time dst
system-time dst recurring {sweek} {sday} {smonth} {stime} {eweek} {eday} {emonth} {etime} [offset]
no system-time dst
system-time manual time ( Set the date and time manually, MM/DD/YYYY-HH:MM:SS )
system-time ntp { timezone } { ntp-server } { backup-ntp-server } { fetching-rate }
6.3.19 user Command
Description:
Add a new user or modify an exist user
Syntax:
user name user-name password password [ type { guest | admin }] [ status { disable | enable}] [secret {simple | cipher}]
no user name user-name
user access-control ip-based ip-addr ip-mask
no user access-control
user access-control mac-based mac-addr
no user access-control
user access-control port-based interface { fastEthernet port | gigabitEthernet port | range fastEthernet port-list | range
gigabitEthernet port-list }
no user access-control
user idle-timeout minutes (The timeout time, ranging from 5 to 30 in minutes. By default, the value is 10).
no user idle-timeout
user max-number admin-num guest-num
no user max-number
252