PLANET FGSW-2840 - Manual (Page 108)

User’s Manual of FGSW-2840 / FGSW-4840S
VLAN Trunking between two 802.1Q aware switches
Most of the cases are used for “Uplink” to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in Figure 4-4-4 appears.
Figure 4-4-4: VLAN Trunking between Two 802.1Q Aware Switches Diagrams
Setup steps
1. Create VLAN Group 2 and 3
Add VLAN group 2 and group 3.
2. Assign member port to VLAN group 2 and group 3:
Port-1,Port-2 and Port-3: VLAN 2 group.
Port-4,Port-5 and Port-6: VLAN 3 group.
Port-7 : VLAN 1 group.
108