PLANET FGSW-2840 - Manual (Page 20)

User’s Manual of FGSW-2840 / FGSW-4840S
■ 10/100/1000Base-T Interfaces (Port 49 to port 50)
LED
Color Function
Lights: To indicate the link through that port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blink: To indicate that the Switch is actively sending or receiving data over that port.
10/100
LNK/ACT Orange
Lights:
Blink:
To indicate the link through that port is successfully established at 10Mbps or 100Mbps.
To indicate that the Switch is actively sending or receiving data over that port.
■ 1000Base-X SFP Interfaces (Port 51 to port 52)
LED
Color Function
Lights: To indicate the link through that port is successfully established at 1000Mbps.
LNK/ACT Green
Blink: To indicate that the Switch is actively sending or receiving data over that port.
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-1-5 & Figure 2-1-6 shows the rear panel of this Managed Switch.
Rear Panel
Figure 2-1-5: Rear Panel of FGSW-2840
Rear Panel
Figure 2-1-6: Rear Panel of FGSW-4840S
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range of 100-240V AC and 50/60Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet and the power will be ready.
Power Notice:
The device is a power-required device, which means it will not work till it is powered. If your networks
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
20