PLANET FGSW-2840 - Manual (Page 209)

User’s Manual of FGSW-2840 / FGSW-4840S
4.9.2.1 Notification Config
This page provides SNMP notification function and the screen in Figure 4-9-9 appears.
Figure 4-9-9: Notification Config Page Screenshot
The page includes the following fields:
Object Description
Create Notification
Enter the IP Address of the management Host.  IP Address
Enter the number of the UDP port used to send notifications. The UDP port
functions with the IP address for the notification sending. The default is 162.
 UDP Port
Enter the User name of the management station.  User
 Security Model Select the Security Model of the management station.
 Security Level Select the Security Level for the SNMP v3 User.
 noAuthNoPriv: No authentication and no privacy security level are used.
 authNoPriv: Only the authentication security level is used.
 authPriv: Both the authentication and the privacy security levels are used.
 Type Select the type for the notifications.
 Trap: Indicates traps are sent.
 Inform: The Inform type, employed on SNMPv2c and SNMPv3, has a higher
security than the Trap type.
 Retry Specify the amount of times the Managed Switch resends an inform request. The
Managed Switch will resend the inform request if it doesn’t get the response from
the management station during the Timeout interval, and it will terminate resending
the inform request if the resending times reach the specified Retry times.
209