PLANET FGSW-2840 - Manual (Page 206)

User’s Manual of FGSW-2840 / FGSW-4840S
4.9.1.5 SNMP Community
The SNMP v1 and SNMP v2c adopt community name authentication, the community name can limit access to the SNMP agent
from SNMP network management station, functioning as a password. If SNMP v1 or SNMP v2c is employed, it can directly
configure the SNMP Community on this page without configuring SNMP Group and User; the screen in Figure 4-9-7 appears.
Figure 4-9-7: SNMP Community Page Screenshot
The page includes the following fields:
Object Description
Community Config
 Community Name Enter the Community Name here.
 Access Defines the access rights of the community.
 read-only: Management right of the Community is restricted to read-only, and
changes cannot be made to the corresponding View.
 read-write: Management right of the Community is read-write and changes can
be made to the corresponding View.
 MIB View Select the MIB View for the community to access.
Community Table
Select the desired entry to delete the corresponding Community. It is multi-optional.  Select
 Community Name Displays the Community Name here.
Displays the right of the Community to access the View.  Access
Displays the Views which the Community can access.  MIB View
 Operation Click the Edit button to modify the MIB View and the Access right of the Community,
and then click the Modify button to apply.
206