5 firmware command, 6 logout command, 7 loopback command – PLANET FGSW-2840 User Manual
Page 242: 8 ping command, 9 reboot command
User’s Manual of FGSW-2840 / FGSW-4840S
6.2.5 firmware command
Description:
The firmware command is used to upgrade the Managed Switch system file via the TFTP server
Syntax:
firmware upgrade ip-address ip-addr filename name
6.2.6 logout command
Description:
Logout the system
Syntax:
logout
6.2.7 loopback Command
Description:
The loopback interface command is used to test whether the port is available or not
Syntax:
loopback interface { fastEthernet port | gigabitEthernet port } { internal | external }
6.2.8 ping command
Description:
The ping command is used to test the connectivity between the Managed Switch and one node of the network
Syntax:
ping A.B.C.D - Destination IP address
6.2.9 reboot command
Description:
The command is used to reboot the Managed Switch. To avoid damage, please don’t turn off the device while rebooting
Syntax:
reboot
242