PLANET FGSW-2840 - Manual (Page 204)

User’s Manual of FGSW-2840 / FGSW-4840S
4.9.1.4 SNMP User
The User in an SNMP Group can manage the Managed Switch via the management station software, the User and its Group
has the same security level and access right; the screen in Figure 4-9-6 appears.
Figure 4-9-6: SNMP User Page Screenshot
The page includes the following fields:
Object Description
User Config
 User Name Enter the User Name here.
 User Type Select the type for the User.
 Local User: Indicates that the user is connected to a local SNMP engine.
 Remote User: Indicates that the user is connected to a remote SNMP engine.
Select the Group Name of the User. The User is classified to the corresponding
Group according to its Group Name, Security Model and Security Level.
 Group Name
Select the Security Model for the User.  Security Model
 Security Level Select the Security Level for the SNMP v3 User.
 Auth Mode Select the Authentication Mode for the SNMP v3 User.
 None: No authentication method is used.
 MD5: The port authentication is performed via HMAC-MD5 algorithm .
SHA: The port authentication is performed via SHA (Secure Hash Algorithm) . This
authentication mode has a higher security than MD5 mode.
204