PLANET FGSW-2840 - Manual (Page 37)

User’s Manual of FGSW-2840 / FGSW-4840S
4.2.1.3 System Time
This page allows configuring system time and the settings here will be used for other time-based functions. After setup is
completed, please press “Apply” button to take effect, and the screen in
Figure 4-2-4 appears.
Figure 4-2-4: System Time Page Screenshot
The page includes the following fields:
Object Description
 Time Information
Current System Date:
Displays the current date and time of the Managed Switch.
Current Time Source:
Displays the current time source of the Managed Switch.
 Time Config To set time from the following methods.
 Manual - When this option is selected, you can set the date and time manually.
 Get Time from NTP Server - When this option is selected, you can configure
the time zone and the IP Address for the NTP Server. The Managed Switch will
get time automatically if it is connected to a NTP Server.
 Time Zone: Select your local time.
 Primary/Secondary NTP Server: Enter the IP Address for the NTP
Server.
 Update Rate: Specify the rate of fetching time from NTP server.
 Synchronize with PC Clock - When this option is selected, the administrator
PC clock is utilized.
37