16 snmp-server command – PLANET FGSW-2840 User Manual
Page 250
User’s Manual of FGSW-2840 / FGSW-4840S
250
no rmon history index
6.3.16 snmp-server Command
Description:
SNMP server configuration commands
Syntax:
snmp-server
no snmp-server
snmp-server community name { read-only | read-write } mib-view
no snmp-server community name
snmp-server engineID { [ local local-engineID ] [ remote remote-engineID ] }
no snmp-server engineID
snmp-server group name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ read read-view ] [ write
write-view ] [ notify notify-view ]
no snmp-server group name smode { v1 | v2c | v3 } slev { noAuthNoPriv | authNoPriv | authPriv }
snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ type
{ trap | inform }] [ retries retries ] [ timeout timeout ]
no snmp-server host ip user-name
snmp-server traps { bandwidth-control | cpu | flash | ipaddr-change |loopback-detection | storm-control | spanning-tree }
no snmp-server traps { bandwidth-control | cpu | flash | ipaddr-change |loopback-detection | storm-control | spanning-tree }
snmp-server user name { local | remote } group-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv |
authPriv }] [ cmode { none | MD5 | SHA }] [ cpwd confirm-pwd ] [ emode { none | DES }] [ epwd encrypt-pwd ]
no snmp-server user name
snmp-server view name mib-oid { include | exclude }
no snmp-server view name mib-oid