PLANET FGSW-2840 - Manual (Page 39)

User’s Manual of FGSW-2840 / FGSW-4840S
 Europe: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00.
 New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April, 03:00.
 Recurring Mode
Specify the DST configuration in recurring mode. This configuration is recurring in use.
 Offset: Specify the time adding in minutes when Daylight Saving Time comes.
 Start/End Time: Select starting time and ending time of Daylight Saving Time.
 Date Mode
Specify the DST configuration in Date mode. This configuration is recurring in use.
 Offset: Specify the time adding in minutes when Daylight Saving Time comes.
 Start/End Time: Select starting time and ending time of Daylight Saving Time.
Buttons
: Click to apply changes.
: Click to display help web page.
4.2.1.5 System IP
This page provides three modes to obtain an IP address: Static IP, DHCP and BOOTP. The IP address obtained using a new
mode will replace the original IP address. On this page you can configure the system IP of the Managed Switch. After setup is
completed, please press “Apply” button to take effect, and the screen in
Figure 4-2-6 appears.
Figure 4-2-6: System IP Page Screenshot
39