PLANET FGSW-2840 - Manual (Page 80)

User’s Manual of FGSW-2840 / FGSW-4840S
80
Select the desired port for LACP configuration. It is multi-optional.  Select
Displays the port number.  Port
Specify an admin key for the port. The member ports in a dynamic aggregation
group must have the same admin key.
 Admin Key
Specify a Port Priority for the port. This value determines the priority of the port to
be selected as the dynamic aggregation group member. The port with smaller Port
Priority will be considered as the preferred one. If the two port priorities are equal;
the port with smaller port number is preferred.
 Port Priority
(0-65535)
Specify LACP mode for selected port.  Mode
Enable/Disable the LACP feature for your selected port.  Status
Displays the LAG number which the port belongs to.  LAG
Buttons
: Click to apply changes.
: Click to display help web page.