PLANET FGSW-2840 - Manual (Page 187)

User’s Manual of FGSW-2840 / FGSW-4840S
4.8.1.5 Extend-IP ACL
The Extend-IP ACLs analyze and process data packets based on a series of match conditions, which can be the source IP
addresses, destination IP addresses, IP protocol and other information of this sort carried in the packets; the screen in Figure
4-8-7 appears.
Figure 4-8-7: Extend-IP ACL Page Screenshot
The page includes the following fields:
Object Description
Create Extend-IP Rule
Select the desired Extend-IP ACL for configuration.  ACL ID
 Rule ID
Enter the rule ID.
 Operation
Select the operation for the Managed Switch to process packets which match the
rules.

Permit: Forward packets.
 Deny: Discard Packets.
 S-IP
Enter the source IP address contained in the rule.
 D-IP
Enter the destination IP address contained in the rule.
 Mask
Enter IP address mask. If it is set to 1, it must strictly match the address.
 IP Protocol
Select IP protocol contained in the rule.
Configure TCP/IP source port contained in the rule when TCP/UDP is selected from
the pull-down list of IP Protocol.
 S-Port
 D-Port Configure TCP/IP destination port contained in the rule when TCP/UDP is selected
from the pull-down list of IP Protocol.
187