PLANET FGSW-2840 - Manual (Page 202)

User’s Manual of FGSW-2840 / FGSW-4840S
4.9.1.3 SNMP Group
This page provide configure SNMP Group to control the network access by providing the users in various groups with different
management rights via the Read View, Write View and Notify View; the screen in Figure 4-9-5 appears.
Figure 4-9-5: SNMP Group Page Screenshot
The page includes the following fields:
Object Description
Group Config
 Group Name Enter the SNMP Group name. The Group Name, Security Model and Security Level
compose the identifier of the SNMP Group. The Groups with these three items the
same are considered to be the same.
 Security Model Select the Security Model for the SNMP Group.
 v1: SNMPv1 is defined for the group. In this model, the Community Name
is used for authentication. SNMP v1 can be configured on the SNMP
Community page directly.
 v2c: SNMPv2c is defined for the group. In this model, the Community
Name is used for authentication. SNMP v2c can be configured on the
SNMP Community page directly.
 v3: SNMPv3 is defined for the group. In this model, the USM mechanism
is used for authentication. If SNMPv3 is enabled, the Security Level
field is enabled for configuration.
 Security Level Select the Security Level for the SNMP v3 Group.
 noAuthNoPriv: No authentication and no privacy security level is used.
202