PLANET FGSW-2840 - Manual (Page 233)

User’s Manual of FGSW-2840 / FGSW-4840S
4.10.4.2 Tracert
The Tracert test function is used to test the connectivity of the gateways during its journey from the source to destination of the
test data. When malfunctions occur to the network, it can locate trouble spot of the network with this tracert test. The screen in
Figure 4-10-15 appears.
Figure 4-10-15: Tracert Page Screenshot
The page includes the following fields:
Object Description
Tracert Config
Enter the IP address of the destination device.  Destination IP
 Max Hop Specify the maximum number of the route hops the test data can pass through.
Tracert Result
Display the tracert result.  Tracert Result
Buttons
: Click to start the tracert function.
: Click to display help web page.
233