PLANET FGSW-2840 - Manual (Page 63)

User’s Manual of FGSW-2840 / FGSW-4840S
4.3.1.1 Port Config
This page provides configuring the basic parameters for the ports of Managed Switch. When the port is disabled, the packets on
the port will be discarded. Disabling the port which is vacant for a long time can reduce the power consumption effectively and it
can enable the port when it is in need; the screen in
Figure 4-3-3 appears.
Figure 4-3-3: Port Config Page Screenshot
The page includes the following fields:
Object Description
Port Config
Click the Select button to quickly select the corresponding port based on the port
number that entered.  Port Select
 Select
Select the desired port for configuration. It is multi-optional.
 Port
Displays the port number.
 Description
Give a description to the port for identification.
Allows you to enable/disable the port. When Enable is selected, the port can
forward the packets normally.
 Status
 Speed and Duplex Select the Speed and Duplex mode for the port. The device connected to the
63