RIGOL MSO/DS2000A Series - Manual (Page 53)

Chapter 1 Quick Start RIGOL
MSO2000A/DS2000A User’s Guide 1-25
 System Time
Displayed in “hh:mm (hour:minute)” format. When printing or storing
the waveform, the output file will contain this time message. Press
Utility  System  System Time  System Time to set through
the following format: yyyy-mm-dd hh:mm:ss (year-month-date
hour:minute:second)
 Sound Icon
When the sound is enabled, will be displayed. Press Utility  Sound to
enable or disable the sound.
 USB Storage Device Icon
When a USB storage device is detected, will be displayed.
20. Operation MENU
Press any softkey to activate the corresponding menu. The following
symbols might be displayed in the menu.
Denote that at the front panel can be rotated to select the
parameter items. The backlight of turns on when the parameter
selection is valid.
Denote that can be rotated to modify the parameter values. The
backlight of turns on when the parameter input is valid.
Denote that can be rotated to modify the parameter values and
press to input the desired paramrter values directly using the
pop-up numeric keyboard. The backlight of turns on when the
parameter input is valid.
Denote that you can rotate the “Navigation Knob” to quickly
adjust/locate parameters.
Denote that you can rotate to adjust the parameter and then
press down to select the parameter. The backlight of is
constant on.
Denote that the current menu has several options.
Denote that the current menu has a lower level menu.
Press this key to return to the previous menu.
Note: The following direction keys might appear in the grid at the lower-left
corner of the menu bar:
Denote that you can open the next page menu.
Denote that you can open the previous page menu.