RIGOL MSO/DS2000A Series User Manual

Page 281

RIGOL

MSO2000A/DS2000A User’s Guide

15-13

5. Print Range

Press this key to set the print range to “Screen” or “Wave” and the default is
“Screen”.
 Screen: print the whole screen image.
 Wave: only print the waveform area.

6. Palette

Press this key to set the print color to “Gray Scale” or “Color” and the default is
“Color”.

7. Paper Size

Press this key to open the size list and rotate the multifunction knob

select the desired paper size. You can also press this key continuously to switch
among the options. The sizes include “Default”, “A2”, “A3”, “A4”, “A5”, “A6” or
“B5”.

Note:

The paper sizes available are related to the property of the printer

connected. Sizes not supported by the printer cannot be selected.

8. File Type

Press this key to open the file type list and rotate the multifunction knob

select the desired file type. You can also press this key continuously to switch
among the options. The file types include “Default”, “Jpeg” or “Bmp”.

Note:

The file types available are related to the property of the printer

connected. File types not supported by the printer cannot be selected.

9. Print Quality

Press this key to open the print quality list and rotate the multifunction knob
to select the desired print quality. You can also press this key continuously to
switch among the options. The print qualities include “Default”, “Normal”,
“Draft” or “Fine”.

Note:

The print qualities available are related to the property of the printer

connected. Print qualities not supported by the printer cannot be selected.

10. Date Print

Press this key to set the date print to “ON” or “OFF” and the default is “OFF”.

Note:

The date print is determined by the property of the printer connected. It

cannot be selected if the printer does not support this function.