All measurement, All measurement -23 – RIGOL MSO/DS2000A Series User Manual

Page 159

Text mode
Original mode

RIGOL

MSO2000A/DS2000A User’s Guide

6-23

All Measurement

All measurement could measure all the time and voltage parameters (each
measurement source has 21 items, measurements can be performed on CH1, CH2
and MATH at the same time) of the current measurement source and display the
results on the screen. Press Measure  Display All to enable or disable the all
measurement function. Press Measure Source and use

to select the channel(s)

to be measured (CH1, CH2 and MATH).
 When all measurement is enabled, “One-key” measurement is also valid.
 “To Clear the Measurement” will not clear the results of all measurement.

Figure 6-7 All Measurement

One-key
Measurement

All Measurement