System information, Power-off recall, System information -8 power-off recall -8 – RIGOL MSO/DS2000A Series User Manual

Page 276

Text mode
Original mode

RIGOL

MSO2000A/DS2000A User’s Guide

15-8

System Information

Press Utility  System  System Info to view the version information of your
oscilloscope. The system information contains the following contents as shown in the
figure below.

Figure 15-2 System Information Interface

Power-off Recall

You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.

Press Utility  System  Power On to select “Last” or “Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.