RIGOL MSO/DS2000A Series - Manual (Page 139)

Chapter 6 MATH and Measurements RIGOL
MSO2000A/DS2000A User’s Guide 6-3
 HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results. Press MATH  Operate to select “A x B”:
 Press Source A and Source B to select the desired channels (CH1 or CH2).
 Press
and use to adjust the vertical position of the operation results.
 Press and use to adjust the vertical scale of the operation results.
 Press Invert to turn the inverted display of the operation results on or off.
 Press Label to define a label for the operation results. For the details, please
refer to “ MATH Label”.
 HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Division
Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels. Press MATH  Operate to select “A ÷ B”:
 Press Source A and Source B to select the desired channels (CH1 or CH2).
 Press
and use to adjust the vertical position of the operation results.
 Press and use to adjust the vertical scale of the operation results.
 Press Invert to turn the inverted display of the operation results on or off.
 Press Label to define a label for the operation results. For the details, please
refer to “ MATH Label”.
 HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.