Math label, Math label -11 – RIGOL MSO/DS2000A Series User Manual

Page 147

RIGOL

MSO2000A/DS2000A User’s Guide

6-11

Mantissa: 6.1074

Exponent: 8

5. Operator

The functions of the operators are listed in the following table.

Table 6-4 Operators

Operator

Function

+ - * /

Arithmetic operators: add, subtract, multiply and divide

( )

Parentheses: used to increase the priority of the operation
enclosed in the parentheses

< > <= >=
== !=

Relationship operators: lower than, greater than, lower
than or equal to, greater than or equal to, equal to, not
equal to

!( || &&

Logic operator: NOT, OR, AND

6. Figure

Select from figure 0 to 9, decimal point and character E. Wherein, character E
represents the nth power of 10. For example, 1.5E3 means 1.5×10

7. Label

Press Label to define a label for the operation results. For the details, please
refer to “

MATH Label

The instrument uses

to mark the math operation results by default. For ease of

use, you can also set a label for the math operation results, for example,

Press MATH  Label to open the label input interface. Then input the desired label
according to the instructions in “Channel Label”.

Note:

This operation does not support Chinese input method and the length of the

user-defined label cannot exceed 4 characters.