RISCO Group ACUS - Manual (Page 222)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 194
Figure 192: How to Assign Rule
1. Enter the following details on the screen.
Table 15: How to Assign Rule
Name Default Enabled /
Value
Description
Crisis Level Default crisis level is 1 Numbers of Crisis Levels check boxes are
displayed dynamically according to the
number of crisis levels defined in the
General Settings, Configuration.
Select the required Crisis Level. If crisis
level is not used, then it is disabled.
APB Enabled Not Enabled Select this check box to enable Anti-Pass-
Back for this Rule.
PIN Required Not Enabled When you select it, it applies that a Pin is
required for a Person to access.
Command to execute No Command Select a value from the drop-down. Values
provided are:
Bypass Conditional Sensor