RISCO Group ACUS - Manual (Page 192)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 164
Whenever less than 5 persons or more than 15 persons will enter the zone, an event will be
generated. You can configure up to three events for a zone
9. Click the Category tab. The following figure appears.
Figure 159: Category
Note: The Category tab is only enabled if in General Configuration dialog box, (Settings
Configurations General Configuration) you have selected the Count Person Per
Category check box and selected the category from the Zone Category drop-down list.
In the Category tab, the category values selected for the zone count from general configuration
are displayed. For example, in the General Configuration dialog box, if you select Count Person
Per Category check box and select the Zone Category as Service, then the values of the
category Service are displayed here. In this tab, you can indicate the zone count for each
category. For example, if you select the category Admin, and enter 4 in the Maximum Persons
column, then only four persons from the category Admin will be allowed access to the zone. To
enable the zone count function:
10. Select the check box against the categories for which you want to apply this condition.
11. Enter the number of people allowed to access this zone in the Maximum Persons
column.
12. Select the Block Zone If Maximum Reached check box to ensure that once the
maximum number of persons specified for this category is in the zone, access for the
next person in the same category is blocked.