RISCO Group ACUS - Manual (Page 196)

User Manual for ACUS
Uncontrolled when printed © RISCO Group 168
2. The Zone Name field is blank. Enter the name of the new zone in the Zone Name
field.
3. Make changes wherever required and click Save. The message appears, “Zone
created successfully”.
7.5.5 Delete a Zone
To delete a Zone:
1. Select the check box against the zone which you want to delete and click Delete. The
system displays a message, “Are you sure you want to delete this zone?”
2. Click Yes. The zone is deleted from the list.
7.5.6 Execute Zone Commands
On the zone list, you can select any zone, right-click and execute the commands available. You
may block the zone, unblock or put it in normal mode.
To access zone commands:
1. On the ACUS home page, click Settings AC Elements Zones. The Zone List
dialog box appears.
Or
• On the ACUS home page, click Security Zones. The Zone List dialog box appears.
Figure 164: Zone Commands