Predefined protocol filters, Defining protocol filters – Extreme Networks Summit1 User Manual
Page 98
5-12
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
V
IRTUAL
LAN
S
(VLAN
S
)
P
REDEFINED
P
ROTOCOL
F
ILTERS
The following protocol filters are predefined on the Summit:
•
IP
•
IPX
•
NetBIOS
•
DECNet
•
IPX_8022
•
IPX_SNAP
•
AppleTalk
D
EFINING
P
ROTOCOL
F
ILTERS
If necessary, you can define a customized protocol filter based on EtherType, LLC,
and/or SNAP. Up to six protocols may be part of a protocol filter. To define a protocol
filter, do the following:
•
Create a protocol using the following command:
create protocol
For example:
create protocol fred
The protocol name can have a maximum of 31 characters.
•
Configure the protocol using the following command:
config protocol
Supported protocol types include:
—
etype
— EtherType
The values for
etype
are four-digit hexadecimal numbers taken from a list
maintained by the IEEE. This list can be found at the following URL:
http://standards.ieee.org/regauth/ethertype/index.html
—
llc
— LLC SAP
The values for
llc
are four-digit hexadecimal numbers that are created by
concatenating a two-digit LLC Destination SAP (DSAP) and a two-digit LLC
Source SAP (SSAP). The list of LLC SAPs can be found at the following URL:
http://stdsbbs.ieee.org/pub/general/LLC_list.txt
Summit.bk : 5VLAN.FM Page 12 Thursday, June 18, 1998 9:27 AM