Extreme Networks Summit1 - Manual (Page 138)

9-8 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
IP U NICAST R OUTING
The following example configures the switch to have one multinetted segment (port 5)
that contains three subnets (192.67.34.0, 192.67.35.0, and 192.67.37.0). It also configures a
second multinetted segment consisting of two subnets (192.67.36.0 and 192.99.45.0). The
second multinetted segment spans three ports (port 8, port 9, and port 10). RIP is
enabled on both multinetted segments.
config default delete port 5
create protocol mnet
create vlan net34
create vlan net35
create vlan net37
config net34 ipaddress 192.67.34.1
config net35 ipaddress 192.67.35.1
config net37 ipaddress 192.67.37.1
config net34 protocol ip
config net35 protocol mnet
config net37 protocol mnet
config net34 add port 5
config net35 add port 5
config net37 add port 5
config default delete port 8-10
create vlan net36
create vlan net45
config net36 ipaddress 192.67.36.1
config net45 ipaddress 192.99.45.1
config net36 protocol ip
config net45 protocol mnet
config net36 add port 8-10
config net45 add port 8-10
config rip delete vlan all
config rip add net34
config rip add net36
enable rip
enable ipforwarding
enable multinetting
Summit.bk : 9ROUT.FM Page 8 Thursday, June 18, 1998 9:27 AM