Extreme Networks Summit1 - Manual (Page 69)

S UMMIT S WITCH I NSTALLATION AND U SER G UIDE 3-21
U SING SNMP
D ISPLAYING SNMP S ETTINGS
To display the SNMP settings configured on the Summit, enter the following command:
show management
This command displays the following information:
• Enable/disable state for telnet, SNMP, and Web access
• SNMP community strings
• Authorized SNMP station list
• SNMP trap receiver list
• Login statistics
R ESETTING AND D ISABLING SNMP
To reset and disable SNMP settings, use the commands in Table 3-8 .
Table 3-8: SNMP Reset and Disable Commands
Command Description
disable snmp access Disables SNMP on the switch.
disable snmp trap Prevents SNMP traps from being sent from the switch.
Does not clear the SNMP trap receivers that have been
configured.
unconfig management Restores default values to all SNMP-related entries.
Summit.bk : 3MGMT.FM Page 21 Thursday, June 18, 1998 9:27 AM