Extreme Networks Summit1 - Manual (Page 179)

S UMMIT S WITCH I NSTALLATION AND U SER G UIDE 12-3
S TATUS M ONITORING
show ipmc cache {
{ }} | all} Displays the IP multicast route table. Information
displayed includes the following:
■
IP group address
■
IP source address and mask
■ Upstream neighbor
■
Interface to upstream neighbor
■
Route expiration timer
■ Routing protocol
■
List of next hop interfaces and protocols
show ipqos {
| all} Displays the IP QoS table.
show iproute vlan { | all |
permanent | } Displays the contents of the IP routing table.
show ipstats {vlan [ | all]} Displays statistics of packets handled by the CPU,
including the following:
■
inpackets, outpackets
■
ICMP/IGMP statistics
■
IRDP statistics
show log {} {} Displays the current snapshot of the log. Options
include:
■ priority — Filters the log to display message
with the selected priority or higher (more critical).
Priorities include critical, warning, and
informational. If not specified, informational priority
messages and higher are displayed.
■ subsystem — Filters the log to display
messages associated with the selected switch
subsystem. Subsystems include Syst, STP Brdg,
SNMP, Telnet, VLAN, and Port. If not specified,
all subsystems are displayed.
show log config Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages
being sent to the syslog host.
Table 12-1: Switch Monitoring Commands (continued)
Command Description
Summit.bk : 12STATUS.FM Page 3 Thursday, June 18, 1998 9:27 AM