beautypg.com

Extreme Networks Summit1 User Manual

Page 172

background image

11-4

S

UMMIT

S

WITCH

I

NSTALLATION

AND

U

SER

G

UIDE

IP M

ULTICAST

R

OUTING

Table 11-2

describes the command used to configure the Internet Gateway Message

Protocol (IGMP).

config dvmrp timer

Configures the global DVMRP timers. Specify
the following:

route_report_interval

— The amount

of time the switch waits between transmitting
periodic route report packets. The range is 1
to 4294967296 seconds (136 years). The
default setting is 60 seconds.

route_replacement_time

— The

hold-down time before a new route is
learned, once the previous route has been
deleted. The range is 1 to 4294967296
seconds (136 years). The default setting is
140 seconds.

config ipmc cache timeout

Configures the aging time for IP multicast cache
entries. The default setting is 300 seconds.

Table 11-2: IGMP Configuration Commands

Command

Description

enable igmp {vlan | all}

Enables IGMP on a router interface. The default
setting is enabled.

enable igmp snooping {vlan | all}

Enables IGMP snooping. The default setting is
disabled.

Table 11-1: IP Multicast Routing Configuration Commands (continued)

Command

Description

Summit.bk : 11IPMULT.FM Page 4 Thursday, June 18, 1998 9:27 AM