Extreme Networks Summit1 - Manual (Page 180)

12-4 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
S TATUS M ONITORING AND S TATISTICS
show management Displays network management configuration and
statistics including enable/disable states for Telnet
and SNMP, SNMP community strings, authorized
SNMP station list, SNMP trap receiver list, and login
statistics.
show memory Displays the current system memory information.
show mirroring Displays the port-mirroring configuration.
show ospf Displays global OSPF information.
show ospf area { | all} Displays information about a particular OSPF area,
or all ospf areas.
show ospf interfaces {vlan |
area | all} Displays information about one or all OSPF
interfaces. If no argument is specific, all OSPF
interfaces are displayed.
show ospf lsdb {detail} {area |
all} {router | network | summary_net |
summary_asb | as_external | all} Displays a table of the current link state database.
You can filter the display using either the area ID or
the remote router’s router ID, or the link state ID. The
default is
all with no detail. If detail is specified,
each entry includes complete LSA information.
show ospf virtual-link {
| all} Displays virtual link information about a particular
router or all routers.
show port {} collisions Displays real-time collision statistics.
show port {} config Displays the port configuration, including the
following:
■
Port state
■ Link state
■
Link speed
■
Duplex mode
■
Flow control
■
Load sharing information
■ Link media information
■
QoS information
Table 12-1: Switch Monitoring Commands (continued)
Command Description
Summit.bk : 12STATUS.FM Page 4 Thursday, June 18, 1998 9:27 AM