Extreme Networks Summit1 - Manual (Page 189)

S UMMIT S WITCH I NSTALLATION AND U SER G UIDE 12-13
S WITCH L OGGING
Table 12-5: Logging Commands
Command Description
config log display {} {} Configures the real-time log display. Options
include:
■ priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
■ subsystem — Filters the log to display
messages associated with the selected
switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
config syslog
{} {} Configures the syslog host address and filter
messages sent to the syslog host. Options
include:
■ ipaddress — The IP address of the
syslog host.
■ facility — The syslog facility level for
local use.
■ priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, only critical priority messages
and are sent to the syslog host.
■ subsystem — Filters the log to display
messages associated with the selected
switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
sent to the syslog host.
enable log display Enables the log display.
enable syslog Enables logging to a remote syslog host.
disable log display Disables the log display.
disable syslog Disables logging to a remote syslog host.
Summit.bk : 12STATUS.FM Page 13 Thursday, June 18, 1998 9:27 AM