Extreme Networks Summit1 - Manual (Page 55)

S UMMIT S WITCH I NSTALLATION AND U SER G UIDE 3-7
C OMMON C OMMANDS
config time Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You
cannot set the year past 2023.
config vlan ipaddress
{} Configures an IP address and subnet
mask for a VLAN.
enable bootp vlan [ | all] Enables BOOTP for one or more VLANs.
enable idletimeout Enables a fixed value timer that
disconnects all sessions (both Telnet and
console) after 20 minutes of inactivity.
The default setting is disabled.
clear session Terminates a Telnet session from the
switch.
disable bootp vlan [ | all] Disables BOOTP for one or more VLANs.
disable idletimeout Disables the fixed value timer that
disconnects all sessions. Once disabled,
console sessions remain open until the
switch is rebooted. Telnet session remain
open until you close the Telnet client.
disable port Disables a port.
disable telnet Disables Telnet access to the switch.
disable web Disables Web access to the switch.
delete account Deletes a user account.
delete vlan Deletes a VLAN.
unconfig switch {all} Resets all switch parameters (with the
exception of defined user accounts) to the
factory defaults. If you specify the
keyword
all , the user account information
is reset as well.
show banner Displays the user-configured banner.
Table 3-3: Common Commands (continued)
Command Description
Summit.bk : 3MGMT.FM Page 7 Thursday, June 18, 1998 9:27 AM