Yaskawa i80M Connecting Manual - Manual (Page 6)

INTRODUCTION
This manual describes the specifications for connecting i 80 with machines, machine
interfaces and external equipment.
Necessary connections to be provided by the machine manufacturer differ depending on
the type of the cabinet supplied by Yaskawa. Make additions or deletions of connections
in accordance with the combination for standard cabinets and integrated units.
The programmable controller system (hereafter called PC) is installed in the YASNAC i 80
CNC cabinet. For details of the PC, refer to Instruction Manual for i 80 PC System
(TOE-C843-11. 1)
2 CONFIGURATION
2.1 SYSTEM CONFIGURATION
The system configuration of i 80 is shown below.
YASNAC
CPU MODULE
I
CRT
OPERATORS
PANEL MACHINE
FEED
SERVO
FEED
UNIT MOTOR
i
1
SPINDLE SPINDLE
UNIT MOTOR
MACHINE
CONTROL
STATION &
I
MACHINE
I
.__
_i
STRONG CURRENT
UNIT
Fig. 2.1 System Configuration of i 80