Yaskawa i80M Connecting Manual - Manual (Page 325)

DIMENSIONS in mm
1 SERVO MOTOR
(1) USAGED-02A S1
LC
4
/10
MOTOR
NOTE :
l. Absolute encoder is used.
2. Vibration: 15 or below
Detail of Shaft Extension
4. Dimensions of the keyway are based on JIS “Sunk
keys and Their corresponding keyways (close keys),”
5. Connector should be installed downward.
3. Plug and clam p are n’ot attached for receptacle connection
(2) USAGED-05A S1
L
LL LR
LT L M
LG
LE
1
-
m
y
KB 1
ENCODER KB2
CONNECTOR
MOTOR CONNECTOR
NOTE :
encoder used
2. Vibration: 15 or below.
3. Plug and clamp are not attached for receptacle connection
. .
Detail of Shaft Extension
4. Dimensions of the keyway are based on
keys and Their corresponding keyways (close keys).”
5. Connector should be installed downward,