Yaskawa i80M Appendix - Manual (Page 8)

5. DATA SETTING RANGE
Item
Minimum input unit
Max, stroke (distance from
reference point )
Amount of tool offset and tool
radius
Minimum amount of step/handle
feed
Rapid traverse rate
— - - - - - - — - - - - - — - - - - — - - -
Manual jog speed
— ---- —----—
of F.
Upper limit of cutting feed
--
Dry run speed
Stored pitch error compensation
and setting range of stored stroke
limit and No. 2–4 reference point
Amount of backlash compensation
Amount of work coordinate
system shift
Output for screw (mm)
I
Output for screw (in. )
Input (mm) Input (in. ) Input (mm) Input (in. )
or 0.0001 or 0.001 or 0.0001 or
0.01 mm 0.001 in. 0.01 mm 0.001 in.
999999.999 I
o to 999.999 0 to 99.9999 0 to 999.999 0 to 99.9999
mm in. mm in.
0.001 mm 0.0001 in. 0.001 mm 0.0001 in.
0.001 mm 0.0001 in. 0.001 mm 0.0001 in.
0.001 mm 0.0001 in
1 to 240000 mm/min
I
0.1 to 24000.0 in. /rein
1 240000 mm/min
I
0.1 to 24000.0 in. /rein
O to 999999.999 mm O to 99999.9999 in.
(O : Reference point)
pulse pulse
O to 127 pulse I O to *127 pulse
0 to pulse O to
o to 9999.999 0 999.9999 0 *9999.999 o 999.9999
mm in. mm in.
Note : Minimum output unit.