Yaskawa i80M Appendix - Manual (Page 239)

Parameter No. N A M E
F
Spindle forward run M-code No. for drawing
Setting range :0 to 999
Spindle reverse run M-code No. for drawing
Setting range :0 to 999
I
Spindle stop M – code No. for drawing
Setting range :0 to 999
Spindle constant position stop M – code No. for drawing
Setting range :0 to 999
Tool replacement M – code No. for drawing
Setting range :0 to 999
Constant ON M – code No. for drawing
Setting range :0 to 999
Constant OFF M – code No. for drawing
Setting range :0 to 999
Average time required for M – code command for drawing
Setting :1 = lms
Setting range :0 to 65535
[
Average time required for S – code command for drawing
Setting :1 = lms
Setting range :0 to 65535
Average time required for T– code command for drawing
Setting :1 = lms
Setting range :0 to 65535
– 2 3 9 –