Yaskawa i80M Appendix User Manual
Page 134
9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No.
N A M E
#ooo5
(Bit No.
Parameter
(Bit No.
1/0 data
setting
for port
SPNT
FIT
PLBKT
HOFST
CPRNT
ZRN2T
ZRNT
I
7
6
5
4
3
2
1
o
)
O : Program restart switch OFF.
Program restart switch ON.
O :
digit switch OFF.
1:
digit switch ON.
O : Playback switch OFF.
1: Playback switch ON.
O : Automatic mode handle offset switch OFF.
1: Automatic mode handle offset switch ON.
O : Machining interrupt point return switch OFF.
1: Machining interrupt point return switch ON.
O : Manual 2nd reference point return switch OFF.
1:
reference point return switch ON.
O :
reference point return switch OFF.
reference point return switch ON.
@-
Effective for #5000 D =
No.
N A M E
TVCNT2 TVCHK2
7
6
5
4
3
2
1
1 :
1 :
]
Outputs EOB
CR and LF when outputting in ISO
code.
Outputs EOB as LF when outputting in 1S0 code.
Adds TH check bit when outputting in 1S0 code.
no TH check bit when outputting in 1S0
Feed not added when outputting tape.
Feed added when outputting tape.
TH check executed when inputting 1S0 code.
TH check not executed when inputting 1S0 code.
Items in parentheses not counted in TV check.
Items in parentheses counted in TV check.
TV check not executed.
TV check executed.
Outputs tape code in 1S0.
Outputs tape code in EIA.
–
1 3 4
–