Yaskawa i80M Appendix - Manual (Page 125)

( J ]
JOG feedrate parameter numerical value multiplying factor.
[ M )
M Code when outputting with G84.
M05 output at the bottom of the hole of G74, G84.
M05 output prior to M19 output with G76/G77.
Machine lock switch.
Macro interlock editing, display and output (O 8000 level)
Macro interlock edit inhibit (O 8000 level).
Macro interlock edit inhibit (O 9000 level).
Make JOG speed of rotating axis 1/10 of linear axis?
Make valid immediately when amount of offset changes?
Manual 2nd reference point return switch.
Manual absolute function (relative to increment commands).
Manual absolute switch.
Manual movement amount (Reset, reference point return, G92, key setup, etc.).
Manual reference point return switch.
Maximum cutting feedrate (rotation axis).
Maximum cutting feed speed (linear axis).
Maximum feedrate of to F9) command.
Maximum feedrate of handle linear spindle.
Maximum feedrate of the handle rotating spindle.
Maximum rotation relative to 10V spindle command.
Maximum spindle speed in spindle solid tap.
Measuring method of TLM.
Minimum input X 10.
Minute circular skip value.
Mirror image (X-axis to 5th axis).
Mirror image applied to intermediate point with G28 command during mirror
image operation ?
Motor revolutions during spindle GRS input.
Motor revolutions during spindle GSC input.
MST processing when changing mode.
Multiple relative to spindle error area rapid traverse rate.
Multiplying factor of handle feed X 100.
Multiplying factor setting of feedback pulse (X-axis).
#2432
# 4 0 1 6 ( D 2 )
#4016
#4017
#0000
#0020 (DO)
#0021 (DO)
#0022 (DO)
#2000
#4010 (DO)
#0005
#4011
#0000
#4011
#0005 (DO)
#2810
#2800
#2865
#2860
#2861
#1415
#1416
#6008 (DO)
#1000 (DO)
#4450
#4001
#1413
#1412
#4009
#1351
#2459
#1044 (DO)
– 125 –