Yaskawa i80M Appendix - Manual (Page 228)

9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No. N A M E
POSCHG3 ZOFSNEG
(Bit No. 7 6 5 4 3 2 1 o )
coordinate system is used to display positions
on program check screen.
Mechanical coordinate system is used to display
positions on program check screen.
coordinate system is used to display positions
on offset screen.
Mechanical coordinate system is used to display
positions on offset screen.
Mechanical coordinate system is used to display
positions on shift screen and displacement
screen.
coordinate system is used to display positions
on shift screen and displacement screen.
Offset value is added at Z-axis current position display.
Offset value is not added at Z-axis current position
display.
– 2 2 8 –