Yaskawa i80M Appendix - Manual (Page 237)

Parameter No. N A M E
Title display.
Place the first line starting position in the 1st and 2nd digits
(Range 1 to 39).
Place the second line starting position in the 3rd and 4th digits
(Range to 39).
Uses hexadecimal for the 2 digit value and sets this value after
converting to decimal value.
(Setting example) Setting example of 10th character on the first
line and the 12th character on the second line.
Set = 3082
Tool pot display start No.
Setting : Keep memory number
Setting range : 7000 to 7999
Tool pot display end No.
Setting : Keep memory number
Setting range : 7000 to 7999
ATC display magazine tool number
Setting : Keep memory number
Setting range : 7000 to 7999
ATC display spindle tool number
Setting : Keep memory number
Setting range : 7000 to 7999
ATC display weight pot tool number
Setting : Keep memory number
Setting range : 7000 to 7999
pot display start number
Setting : Keep memory number
Setting range : 7000 to 7999
– 2 3 7 –