Yaskawa i80M Appendix - Manual (Page 136)

9.2 PARAMETER NUMBER TABLE (Cent’d)
Parameter No. N A M E
SLT5 SLT4 SLT3 SLT2
(Bit No. 7 6 4 3 2 1 o )
P a r a m e t e r
Internal inhibit of 5th stored stroke limit.
External inhibit of 5th stored stroke limit.
Internal inhibit of 4th stored stroke limit.
External inhibit of 4th stored stroke limit.
Internal inhibit of 3th stored stroke limit.
External inhibit of 3th stored stroke limit.
Internal inhibit of 2th stored stroke limit.
External inhibit of 2th stored stroke limit.
Invalidates 5th stored stroke limit.
Validates 5th stored stroke limit.
Invalidates 4th stored stroke limit.
Validates 4th stored stroke limit.
Invalidates 3rd stored stroke limit.
Validates 3rd stored stroke limit.
Invalidates 2nd stored stroke limit.
Validates 2nd stored stroke limit.
N A M E
TLNUM2 TLNUM1 OUTPORT INPORT
(Bit No. 6 5 4 3 2 1
D6 Group Tool
Number of
128 2
Tool Control 64 4
and 1 0 32 8
Tools 1 1 16 16
O : Specifies
Specifies
1st port (FC200) as the output port.
2nd port
) as the output port.
O : Specifies 1st port as the Input port.
: Specifies 2nd port ( as the Input port.
– 136 –