Yaskawa i80M Appendix - Manual (Page 187)

Parameter No. N A M E
m
#1414
#1418
SOR
Spindle motor r/rein at spindle orientation input
Setting : 1 = r/rein
Setting range : 0 to 32767
GRO
1
Motor revolutions when spindle is input.
Setting : 1 = 10/32767 V
Setting range : 0 to 32767
Spindle indexing origin position.
Setting : 360/4096 deg
Setting range : 0 to 4096
Revolutions with 10V solid tap command.
Setting : 1 = 1 rpm or 10 rpm (Determined by #1002 DO)
Setting range : 0 to 32767
1
Maximum revolutions of solid tap spindle.
Setting : 1 = rpm or 10 rpm (Determined by #1002 DO)
Setting range : 0 to 32767
I
Solid tap spindle position loop gain.
Setting : 1 = 0.001 [S
- ’1
Setting range : 0 to 32767
Revolutions in solid tap command 10V when spindle gear B is selected.
Setting : 1=1 rpm or 10 rpm (depending on setting of #1002 DO)
Setting range :0 to 32767
Maximum revolutions of solid tap spindle when spindle gear B is selected.
Setting :1
1 rpm or 10 rpm (depending on setting of #1002 DO)
Setting range :0 to 32767
– 1 8 7 –