Yaskawa i80M Appendix - Manual (Page 122)

9.1 PARAMETER NUMBER LIST (Cent’d)
Parameter number Index (Alphabetical order)
The axes parameters below are represented by X–axis parameter numbers.
Absolute value encoder (X-axis). #1044 (D4)
speed constant of regular cutting (X-axis to 5th axis). #2501
speed constant when thread cutting/tapping (X-axis to 5th axis). #2511
Addition of amount of work coordinate shift correction. #0007
Added axis be disregarded ? #6000
speed time constant (main axis). #2471
Advance read stop M code. #4400
Alarm occur if cycle starts without returning to reference point once after
switching on the power. #4018 (DO)
Alarm occur when starting, without resetting after program editing operation ? #4001 (D7)
Amount of movement per motor revolution (X-axis to 5th axis). #1821
Amount of override in G60(X-axis to 5th axis). #4461
Amount of return with G73. #0870
Amount of return with G83. #0871
Amount of TLM bias. #0806
Automatic axis naming system. #1142
Automatic coordinate setting (X-axis to 5th axis). #4006 (DO)
Automatic coordinate system setting value during inches input. #4811
Automatic coordinate system setting value during millimeters input
(X-axis to 5th axis). #4801
Automatic handle offset possible, area. #2003
Automatic mode HANDLE OFFSET switch. #0005
Automatic series of all axes names. #1169
Auxiliary function lock switch. #0000
Axis display name.
Axis removal specification (X-axis to 5th axis). #6006 (DO)
Backlash sub offset.
#1701
Backlash offset. (X-axis to 5th axis)
#1551
Block delete switch. #0000
Buzzer sound (Operator panel). #0007 (D7)
Call
Call
Call
Call
Call
M code (1 to 24) of M code macro. #4504
program No. (1 to 24) of G code macro. #4840
program No. (1 to 24) of M code macro. #4864
specification of B code macro (1 to 24). #4890
specification (1 to 24) of T code macro (1 to 24). #4889
Change point of correction amount.
Changeover point of correction direction. #4013
#4013
– 1 2 2 –